Industrial Compliant Wireless LAN and LAN
- Compliant with the IEEE 802.11a/b/g/n/ac wireless technology
- 802.11ac 2T2R MU-MIMO architecture with data rate of up to 1267Mbps (400Mbps at 2.4GHz and 867Mbps at 5GHz)
- Equipped with two 10/100/1000Mbps RJ45 ports with link aggregation supported
- IPv4 and IPv6 dual-stack management networks
RF Interface Characteristics
- Four 5dBi detachable antennas with RP-SMA connectors
- High output power up to 400mW with multiply-adjustable transmit power control.
Outdoor Environmental Characteristics
- IP55 rating protection, UV resistance and passive PoE design
- Rugged protection with aluminum extrusion case and ground terminal
- Operating temperature: -20~70°C
Multiple Operation Modes and Wireless Features
- Multiple operation modes: AP, Client Bridge, WDS
- WMM (Wi-Fi multimedia) provides higher priority to multimedia transmitting over wireless
- Wireless Traffic Shaping to control the upload/download bandwidth for each SSID/user
- RSSI Threshold to limit the weak signal of clients occupying session
- Wi-Fi scheduler allows wireless to enable/disable based on predefined schedule
- Supports band steering to balance the client load from 2.4GHz to 5GHz
- Supports fast roaming to provide seamless connectivity
Secure Network Connection
- Full encryption supported: 64-/128-/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
- Supports 802.1Q VLAN pass-through over WDS and SSID-to-VLAN mapping
- Supports up to 64 entries of MAC address filtering
- Supports Guest Network to provide a separate network for visitors
Dimension (WxDxH) 114.3 x 47.7 x 191mm (without antennas)
114.3 x 47.7 x 578mm (with antennas)
Weight 512g
576g (with antennas)